Posts Tagged ‘alarm’

Modem used in an alarm system

Sunday, August 29th, 2010

ORP Systems

This alarm system senses motion and then alerts you by phone. And this fellow, [Oscar] had an old external modem sitting around and, with some wise hardware choices, he came up with a simple circuit to use it. First up is the PIC 16F628A chosen because it doesn’t require an external crystal. This connects with the modem via a DS275 RS232 transceiver because it requires no external parts for connection. The final portion of the puzzle is a PIR sensor that triggers a pin interrupt in the sleeping PIC, which then dials your number to alert you. It doesn’t look like anything happens other than your phone ringing, but that’s enough for a simple system. We’re glad to see how easy it was to use that modem… time to go hunting for one in dreaded junk trunk. Don’t miss the clip after the break.

What you can see in the video is: The modem is turned on and the pic configures it to disable command echo, change to return numeric responses and turn off the volume of the modem speaker. The user has 15 seconds to leave the room, then the pic waits a motion detection. When it is detected the pic dials a fixed phone number and the user will receive the alert.

The pic is programmed in CCS and the source code is included. Well, I bet it’ll be a great project to make. ^_^

Source ORP Systems

Thwart robbers with an old smoke alarm.

Tuesday, March 2nd, 2010

[Anders] tipped us off about his hack that re-purposes a smoke alarm as a burglar alarm. Unfortunately, he came home in the middle of a burglary but wanted to be ready the next time someone tries to break in. By cleverly patching into the test button on an old smoke detector he created a circuit-trip alarm. One side of each piece of wire is secured to the frame and jam of a window. A paper clip completes the circuit by pinching the two bare conductors. If the window is opened the connection is lost and the alarm sounds.

We see a few problems with this system. First off, never hack your ONLY smoke detector, you are putting lives at risk by doing so. But [Anders] says he’ll have a replacement detector and since these things need to be replace every ten years or so, chances are you can find an old one kicking around. We’d recommend disguising the case so that people aren’t confused about it being a smoke detector. Secondly, he’s mounted the alarm right in the window frame so most likely an invader will just smash the thing to bits.

Anyway, it’s still an interesting reuse of these ubiquitous, and life-saving, devices.

courtesy consider the clam via hackaday